Camden · EV charger installation
EV charger installation in Camden.
Mega Power Services installs home EV chargers across Camden NSW 2570. Camden's older boards and longer cable runs mean the install is rarely plug-and-play, so we assess the board, the mains and the run distance first, then install a 7kW or 22kW charger with testing, compliance certification and a lifetime workmanship warranty.
Quote within 24 hours. If a site visit is required, 24–48 hours.
- Level 2 ASP 326250C
- Electrical contractor 497290C
- Refrigeration AU55381
- Security 000244927
Registered at 16 Senna Ave, Denham Court NSW 2565
What this job looks like in Camden.
In the Camden township the limiting factor is usually the switchboard: an older board with no spare capacity and no RCD protection has to be dealt with before a charger goes anywhere near it.
On the rural blocks the limiting factor is distance. A charger on a shed a hundred metres from the board needs cable sized for that run, or it simply won't deliver its rated output — and a quote that ignores this is a quote you'll pay twice.
We look at both, quote them as visible line items, and let you decide what to do now and what to leave.
What it costs
Straightforward Camden installs are typically $1,200–$2,200. Older boards needing replacement and long rural runs add cost, shown as separate line items so you can see exactly what you're paying for.
What's included
Board and mains assessment
What the existing Camden board and supply will carry, tested rather than assumed.
Charger installation
7kW single phase or 22kW three phase on a dedicated protected circuit.
Long rural runs done properly
Cable sized for the actual distance to a shed or detached garage, so the charger performs at its rating.
Board upgrade where required
Priced separately and up front, including RCD protection on older Camden boards.
Free quote — ev charger installation, Camden.
Send the details and a licensed tradesperson calls you back. Power out or something unsafe? Call instead — someone picks up, any hour.
Or call 1300 420 620Camden — common questions
Can I put an EV charger on an old Camden switchboard?
Not safely, in most cases. If the board has ceramic fuses or no RCD protection it needs upgrading first. We quote both together so you see the full cost before committing.
I want the charger at the shed, not the house. Is that possible?
Yes — it's a common Camden request. It needs correctly sized cable for the run and possibly a sub-board at the shed, both of which we assess and price on site.
Are you qualified for new energy work?
Yes. We're a New Energy Tech Consumer Code signatory and licensed for solar, battery and EV charging work, alongside electrical contractor licence 497290C.