Power out, sparking or unsafe? Limited emergency slots held each day.24/7 emergency electrician
Urgent repairs · Upgrades · EV ready
Switchboard upgrades, Sydney
Send a photo of switchboard box and get a fixed price back the same business day. No inspection fee, no sales visit, no obligation.
$550 – $2,600
Most Sydney switchboard jobs: $550–$950 for a safety-switch retrofit, $1,400–$2,600 for a full single-phase board
- Single to 3-phase, incl. supply-side work: $2,800–$5,500
- Asbestos in the meter box can add to the job
- Send one photo and you get your actual number — fixed, in writing
Typical Sydney prices — tap to see ranges
- Safety switches onlyBoard is fine, just no RCDs · Retrofit into the existing board$550 – $950
- Post-1990 board, clean swapModern enclosure, tidy wiring · Standard 6–12 circuits, minimal rewiring$1,500 – $2,500
- Ceramic fuse box conversionWhite plug-in fuses with fuse wire · Full enclosure, RCBOs, surge protection$1,800 – $3,500
- Older inner-west / western Sydney stockPre-2000 homes with hidden traps · Asbestos-backed panel, earthing upgrade$3,000 – $5,000
- Three-phase or EV-readyBigger supply for chargers or a reno · Level 2 ASP mains and service line work$3,500 – $6,500+
These are typical Sydney ranges, not a quote. Send one photo of your board and Ajen confirms your fixed price in writing before any work starts.
Same day
Fixed price back from one photo
- Level 2 ASP 326250C
- Electrical contractor 497290C
- $20M public liability
- Lifetime workmanship warranty
- Licensed work stays in-house
- 4.9★ across 51 Google reviews
Photo in, price back
“Ajen and crew installed a 42kwh battery and 10kw inverter for me. Very happy with promptness, knowledge, professionalism and neatness of install. Use him he is solid.”
Tap your board type — takes 5 seconds
Step 1 of 4
Which board do you have?
No fee
Quoting costs you nothing
Lifetime
Workmanship warranty
AS/NZS 3000
Compliant and certified
Urgent repairs · Upgrades · EV ready
Switchboards & power restoration — licensed in-house, Sydney wide.
What's covered
Everything in scope, named up front.
A switchboard upgrade replaces old ceramic fuses or an undersized board with a compliant board carrying RCBO safety switches, correct labelling and capacity for the load you actually run. Most Sydney homes are done in a day, on a fixed price agreed before we start. Mega Power Services is a Level 2 ASP contractor, so a mains or metering upgrade in the same job is handled by the same crew.
Ceramic fuse replacement
Rewireable fuses swapped for modern circuit breakers with proper fault discrimination.
RCD safety switches
Compliant RCBO protection on every circuit — not just the two the old rules required.
Single to 3-phase
Capacity for ducted air, induction cooking, EV charging and workshop equipment.
EV charger ready
Board sized and a dedicated circuit provisioned so the charger install is straightforward later.
Board relocation
Meter box and board moved and re-terminated when a renovation demands it.
Full circuit testing
Every circuit tested, labelled and documented, with the certificate emailed to you.
Consumer protection
This upgrade itself sits outside the New Energy Tech Consumer Code — the Code covers solar, battery and EV charging work, which we're an approved signatory for. If your board is being upgraded to run a charger or a battery, that part of the job is done to Code standards.
Our price promise
Best price guaranteed.
You'll get one fixed number before a tool comes out of the van. If you already hold a like-for-like written quote from another licensed Sydney electrician, we'll beat it — or tell you honestly why theirs is cheaper, which is usually scope they've left out.
Fixed quote, in writing
One number, approved by you before work starts. Nothing lands on the invoice that wasn't on the quote.
We'll beat a like-for-like quote
Same scope, same licences, same warranty. Send the written quote through and we'll better it.
No hidden extras
If we find something behind the wall, you approve the price before we touch it.
Compliance included
RCD protection, testing and your Certificate of Compliance are inside the quoted price.
Electrical contractor 497290C · $20M public liability · Lifetime workmanship warranty.
Price beat applies to a current written quote for the same scope, licences and warranty.
In writing
The Mega Power Guarantee
Lifetime Labour Warranty
We stand behind our workmanship, and the installations that depend on it, for life.
Fixed Price Promise
The price we quote is the price you pay. No hidden extras, no surprise add-ons, unless you approve them first.
Best Value Guarantee
Find a lower written quote for the same scope and standard, and we'll match it and give you $100.
How it runs.
01
Photograph the board
Open the cover if it's safe, and get the whole board in frame.
02
Upload it
One photo through the form below. Thirty seconds, no phone call needed.
03
Fixed price, same day
A licensed electrician assesses the photo and sends a firm price.
04
Install & certify
Most boards are done in a day, with the compliance certificate issued.
Real jobs, real Sydney customers.
4.9 from 51 Google reviewsMick Liddle
42kWh battery + 10kW inverter
"Ajen and crew installed a 42kwh battery and 10kw inverter for me. Very happy with promptness, knowledge, professionalism and neatness of install. Use him he is solid."
Alex Osmakoff
Fox ESS battery retrofit to existing solar
"Ajen (electrician) installed a Fox ESS battery and joined it with the existing solar panel system. This was not an easy installation, but he managed all the complexities. At the end the system worked as expected. He is also very pleasant to work with, punctual and professional."
Denise Pan
Fans, LED lighting and security cameras
"Ajen and his team successfully installed our ceiling fan, LED light, outdoor wall lights and security cameras and completed the work very professionally. They did all the required work diligently and with extreme safety. Amazing work and highly recommend!"
Straight answers.
The questions we get asked before every switchboards & power restoration job.
- A safety-switch retrofit into an existing board is usually $550 to $950. A full single-phase board replacement typically runs $1,400 to $2,600. Going from single to 3-phase, including the supply-side work, is generally $2,800 to $5,500. Send a photo and we'll give you the actual number.
Photo in, price back
Open the switchboard cover if it's safe to do so, take one clear photo of the whole board, and upload it here.
1300 420 620Prefer to talk? You'll get a licensed tradesperson, not a receptionist.
“Ajen and crew installed a 42kwh battery and 10kw inverter for me. Very happy with promptness, knowledge, professionalism and neatness of install. Use him he is solid.”
Where we work
Sydney metro, in-house crews.
- Sydney CBD
- Inner West
- Eastern Suburbs
- North Shore
- Northern Beaches
- Hills District
- Parramatta
- Ryde & Macquarie Park
- Canterbury-Bankstown
- Sutherland Shire
- Liverpool
- Penrith
- Blacktown
- Hornsby
- Wollongong
- Central Coast